2017 Oct. New JN0-643 Exam Dumps with PDF and VCE Free Updated Today! Following are some JN0-643 Questions:

1.|2017 New JN0-643 Exam Dumps (PDF & VCE) 301Q&As Download:

https://www.braindump2go.com/jn0-643.html

2.|2017 New JN0-643 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/0B75b5xYLjSSNSXllWnNFZnB5NG8?usp=sharing

 

QUESTION 1
Referring to the exhibit, which two statements are correct? (Choose two.)
[edit protocols ospf]
user@R2# show
area 0.0.0.6 {
nssa {
default-lsa default-metric 10;
area-range 184.23.12.0/24;
}
interface ge-1/1/4;
}
[edit protocols ospf]
user@R2# show ospf database
OSPF database, Area 0.0.0.0
Type ID Adv Rtr Seq Age Opt Cksum Len
Router *192.168.0.2 192.168.0.2 0x80000004 749 0x22 0x87c2 60
Router 192.168.0.3 192.168.0.3 0x80000004 399 0x22 0x94b5 60
Summary *10.0.0.0 192.168.0.2 0x80000003 19 0x22 0xe2e4 28
Summary *192.168.0.1 192.168.0.2 0x80000002 1100 0x22 0xbda7 28
OSPF database, Area 0.0.0.6
Type ID Adv Rtr Seq Age Opt Cksum Len
Router 192.168.0.1 192.168.0.1 0x80000004 404 0x20 0x76db 60
Router *192.168.0.2 192.168.0.2 0x80000003 1802 0x20 0x319b 48
Summary *11.0.0.0 192.168.0.2 0x80000002 2504 0x20 0xf5d3 28
Summary *192.168.0.2 192.168.0.2 0x80000003 2153 0x20 0xc5a0 28
Summary *192.168.0.3 192.168.0.2 0x80000002 398 0x20 0xc79d 28
NSSA *0.0.0.0 192.168.0.2 0x80000001 11 0x20 0xcbf1 36
NSSA 184.23.12.0 192.168.0.1 0x80000002 447 0x28 0xb93f 36
OSPF AS SCOPE link state database
Type ID Adv Rtr Seq Age Opt Cksum Len
Extern *184.23.12.0 192.168.0.2 0x80000003 11 0x22 0x28d6 36

A.    R2 injects a Type 3 LSA for 184.23.12.0/24 into the backbone.
B.    R2 is an ABR.
C.    R2 injects a Type 5 LSA for 184.23.12.0/24 into the backbone.
D.    R2 is an ASBR.

Answer: BC

QUESTION 2
Which statement is true regarding OSPF multi-area adjacencies?

A.    A type 3 (stub) link is advertised for a multi-area adjacency.
B.    Configuring a multi-area adjacency allows the corresponding link to be considered an interarea link, so it will be less preferred over an intra-area link.
C.    One logical interface will be a primary link, and the other configured as a secondary link; the secondary link will be established as an unnumbered point-to-point interface.
D.    A DR and a BDR will be elected over the secondary interface, because it is not point-to- point.

Answer: C

QUESTION 3
Referring to the exhibit, which type of LSA will be seen on router A for routes originating in Customer A’s network?
 

A.    Type 7 LSA
B.    Type 2 LSA
C.    Type 5 LSA
D.    Type 1 LSA

Answer: C

QUESTION 4
Referring to the exhibit, which statement is true?
[edit protocols ospf]
user@area-1-abr# show
area 0.0.0.1 {
nssa {
default-lsa {
default-metric 10;
metric-type 2;
type-7;
}
no-summaries;
}
interface so-0/1/1.0;
}

A.    The ABR will generate a Type 3 summary default route into the NSSA.
B.    The ASBR will generate a Type 7 default route into the NSSA.
C.    The type-7 parameter allows interoperability with newer versions of the Junos OS.
D.    The only LSA types allowed into the area are Type 1, Type 2, Type 3, and Type 7.

Answer: B

QUESTION 5
Referring to the exhibit, you are asked to prevent the 184.16.1.0/24 route from entering the backbone.
 
Which configuration statements would accomplish the task?

A.    On router R1, issue the set protocols ospf area 3 nssa area-range 184.16.1.0/24 restrict command.
B.    On router R3, issue the set protocols ospf area 0 area-range 184.16.1.0/24 restrict command.
C.    On router R3, issue the set protocols ospf area 3 area-range 184.16.1.0/24 restrict command.
D.    On router R3, issue the set protocols ospf area 3 nssa area-range 184.16.1.0/24 restrict command.

Answer: D

QUESTION 6
Referring to the exhibit, which two statements are true? (Choose two.)
user@router> show route protocol bgp detail
inet6.0: 8 destinations, 8 routes (8 active, 0 holddown, 0 hidden)
4444:4444::/32 (1 entry, 1 announced)
*BGP PreferencE. 170/-101
Next hop typE. Router, Next hop index:
Address: 0x934c688
Next-hop reference count: 2
SourcE. 172.27.0.5
Next hop: ::172.27.0.5 via ge-0/0/1.0, selected
StatE.
Local AS: 3 Peer AS: 701
AgE. 3:22
Task: BGP_701.172.27.0.5+52965
Announcement bits (1): 0-KRT
AS path: 701 4 I Aggregator: 4 10.255.1.34
Accepted
LocalpreF. 100
Router ID. 10.255.1.31

A.    The IPv6 route was learned from an IPv6 BGP neighbor.
B.    The IPv6 route was learned from an IPv4 BGP neighbor.
C.    The IPv6 destination will use IPv4 as the next hop.
D.    The IPv6 destination will use IPv6 as the next hop.

Answer: BD

QUESTION 7
You are asked to connect Area 2 to the backbone. Which configuration would be required on R3?
 

A.    [edit protocols ospf3]
user@R3# show
area 0.0.0.0 {
virtual-link neighbor-id 10.0.10.1 transit-area 0.0.0.1;
interface ge-0/0/5.0;
}
B.    [edit protocols ospf]
user@R3# show
area 0.0.0.0 {
virtual-link neighbor-id 192.168.1.2 transit-area 0.0.0.1;
interface ge-0/0/5.0 {
interface-type p2p;
}
}
C.    [edit protocols ospf3]
user@R3# show
area 0.0.0.0 {
virtual-link neighbor-id 192.168.1.2 transit-area 0.0.0.1;
interface ge-0/0/5.0;
}
D.    [edit protocols ospf3]
user@R3# show
area 0.0.0.1 {
virtual-link neighbor-id 192.168.1.2 transit-area 0.0.0.1;
interface ge-0/0/5.0;
}

Answer: C

QUESTION 8
Referring to the exhibit, you are asked to verify certain routing information within your OSPFv3 routing domain. You must review the prefixes learned from R3.
 
Which two LSA types from the output shown in the exhibit must be reviewed? (Choose two.)

A.    the Router LSAs from RID 10.0.0.2
B.    the Extern LSAs from RID 10.0.0.2
C.    the InterArPfx LSAs from RID 10.0.0.2
D.    the Network LSAs from RID 10.0.0.2

Answer: BC

QUESTION 9
ISP-A is advertising the 200.0.3.0/24 route to R1. R1 is advertising this BGP route to R2 but the route is hidden on R2.
 
Referring to the exhibit, which statement is correct about the 200.0.3.0/24 route?

A.    The route is unusable because the next hop is not reachable from R2.
B.    The route is unusable because it has not been verified.
C.    The route is hidden because R1 is changing the next hop to 192.168.16.1.
D.    The route is hidden because R2 has a more preferred route.

Answer: A

QUESTION 10
Referring to the exhibit, which AS path regular expression will match only the 10.16.1.0/24 and 10.16.2.0/24 routes?
user@router# run show route receive-protocol bgp 192.168.4.101 detail
inet.0: 18 destinations, 20 routes (18 active, 0 holddown, 0 hidden)
* 10.16.1.0/24 (1 entry, 1 announced)
Accepted
Nexthop: 192.168.4.101
LocalpreF. 100
AS path: 123 111 I
* 10.16.2.0/24 (1 entry, 1 announced)
Accepted
Nexthop: 192.168.4.101
LocalpreF. 100
AS path: 123 222 312 I
* 10.16.3.0/24 (1 entry, 1 announced)
Accepted
Nexthop: 192.168.4.101
LocalpreF. 100
AS path: 123 231 222 I
* 10.16.4.0/24 (1 entry, 1 announced)
Accepted
Nexthop: 192.168.4.101
LocalpreF. 100
AS path: 123 333 111 I

A.    .* (222|111) .*
B.    .+ (222|111) .*
C.    .(222|111) .*
D.    . (.222|.111) .*

Answer: C


!!!RECOMMEND!!!
 

1.|2017 New JN0-643 Exam Dumps (PDF & VCE) 301Q&As Download:

https://www.braindump2go.com/jn0-643.html

 

2.|2017 New JN0-643 Study Guide Video:

https://youtu.be/UbAtE6Yycr8

         

JN0-647 Exam Dumps
[2017-New-Exams]High Quality Braindump2go JN0-647 PDF Dumps 80Q Free Share[1-8]

2017 November New Juniper JN0-647 Exam Dumps with PDF and VCE Free Released Today! Following are some New JN0-647 Questions:          

JN0-643 Exam Dumps
[2017-Oct.-New]100% Success-Braindump2go JN0-643 VCE Dumps 301Q Instant Download[111-121]

2017 Oct. New JN0-643 Exam Dumps with PDF and VCE Free Updated Today! Following are some JN0-643 Questions:          

JN0-643 Exam Dumps
[2017-Oct.-New]Exam Pass 100%!Braindump2go JN0-643 Exam Dumps in VCE and PDF 301Q Instant Download[101-110]

2017 Oct. New JN0-643 Exam Dumps with PDF and VCE Free Updated Today! Following are some JN0-643 Questions: