Guides: Passed Microsoft 70-680 Exam with Braindump2go New Released Practice Tests 70-680 Questions and Answers! (91-100)

Vendor: Microsoft
Exam Code:
70-680
Exam Name: TS: Windows 7, Configuring

advertisement_thumb5_thumb

QUESTION 91
Which of the following must you download from Microsoft’s Web
site to obtain USMT 4.0?

A.    Windows Anytime Upgrade
B.    Windows Upgrade Advisor
C.    WAIK
D.    Microsoft Toolkit

Answer: C

Explanation:

wps732F.tmp_thumb1_thumb

User State Migration Tool
USMT 4.0 is a
command-line utility that allows you to automate the process of user profile
migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and
is a better tool for performing a large number of profile migrations than
Windows Easy Transfer. The USMT can write data to a removable USB storage device
or a network share but cannot perform a direct side-by-side migration over the
network from the source to the destination computer. The USMT does not support
user profile migration using the Windows Easy Transfer cable. USMT migration
occurs in two phases, exporting profile data from the source computer using
ScanState and importing profile data on the destination computer using
LoadState.

QUESTION 92
Which Windows Setup configuration pass applies settings to
Windows 7 before Windows Welcome starts?

A.    OobeSystem
B.    AuditSystem
C.    Specialize
D.    OfflineServicing

Answer: A

QUESTION 93
You require fault tolerance for your operating system so that
your computer running Windows 7 Home Premium can still boot up if a disk fails.
You have two disks and unallocated space on your second disk. What should you
do?

A.    Create a VHD and install an image of your computer on the VHD. Use
BCDEdit to make the
VHD bootable.

B.    Create a RAID-0 volume.

C.    Create a RAID-1 volume.

D.    Create a RAID-5 volume.

Answer: C

QUESTION 94
You have two computers on the same subnet. The computers have
the IPv6 addresses shown in the following table:

wps176A.tmp_thumb_thumb

You need to test the connection to the IPv6 address from Computer1 to
Computer2. Which command should you run?

A.    Ping -6 fe80::44df:1b68%12
B.    Ping -6 fe80::44df:1b68%10
C.    Ping -R fe80::44df:1b68%12
D.    Ping -R fe80::44df:1b68%10

Answer: B
Explanation:
If you are pinging from one host to another
using link-local addresses, you also need to include your interface ID, for
example ping
fe80::39cd:4c93%10.
The % character followed by a number
after each IPv6 address is the interface ID. If you want to display the
configuration of the IPv6 interfaces on the local computer, you can enter netsh
interface ipv6 show address.
Ping -6
Force using IPv6.

QUESTION 95
You have a computer that runs Windows 7. IPv6 is disabled on
the computer.
The computer has the following IPv4 settings:
– IP address:
10.1.1.193
– Subnet mask: 255.255.0.0
– Default gateway: 10.1.1.194

Preferred DNS server: 10.1.1.195
You need to ensure that the computer can
only communicate with computers on the local subnet. What should you do?

A.    Delete the default gateway address.
B.    Delete the preferred DNS
server IP address.
C.    Configure the subnet mask to use
255.255.255.0.
D.    Configure the subnet mask to use 255.255.255.192.

Answer: A
Explanation:
Why gateways work
Default gateways are
important to make IP routing work efficiently. In most cases, the router that
acts as the default gateway for TCP/IP hosts–either a dedicated router or a
computer that connects two or more network segments–maintains knowledge of
other networks in the larger network and how to reach them. TCP/IP hosts rely on
default gateways for most of their communication needs with hosts on remote
network segments. In this way, individual hosts are freed of the burden of
having to maintain extensive and continuously updated knowledge about individual
remote IP network segments. Only the router that acts as the default gateway
needs to maintain this level of routing knowledge to reach other remote network
segments in the larger internetwork. If the default gateway fails, communication
beyond the local network segment may be impaired. To prevent this, you can use
the Advanced TCP/IP Settings dialog box (in Network Connections) for each
connection to specify multiple default gateways. You can also use the route
command to manually add routes to the routing table for heavily used hosts or
networks.

QUESTION 96
You are running Windows 7 on a portable computer. A custom
power plan named “On The Move” is optimized for battery life. The computer
remains running when the portable computer is closed. You need to change a
setting so that when you close the portable computer, it enters sleep mode.

Which setting should you change?
(To answer, select the appropriate
setting in the work area.)

wps49A2.tmp_thumb_thumb

Answer:

wps7007.tmp_thumb_thumb

QUESTION 97
You have a computer that runs Windows 7.
You need to
modify the file extensions that are associated to Internet Explorer.
What
should you do?

A.    From Internet Explorer, click Tools and then click Manage
Add-ons.
B.    From Control Panel, open Default Programs and then click Set
Associations.
C.    From the local Group Policy, expand Computer
Configuration and then click Software Settings.
D.    From Window Explorer,
right-click %programfiles%\Internet Explorer\iexplore.exe and then click
Properties.

Answer: B

QUESTION 98
You have a computer that runs Windows 7.
You run Ipconfig
as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that
you can establish a DirectAccess connection to the network.
What should you
do first?

wps8B55.tmp_thumb_thumb

A.    Create a new VPN connection.
B.    Configure a static IPv4
address.
C.    Enable IPv6 on the network adapter.
D.    Add an additional
default gateway address.

Answer: C

QUESTION 99
You have a computer that runs Windows 7.
You discover that
an application named App1 runs during the startup process.
You need to
prevent only App1 from running during startup. Users must be allowed to run App1
manually.
What should you do?

A.    From the local Group Policy, modify the application control
policy.
B.    From the local Group Policy, modify the software restriction
policy.
C.    From the System Configuration tool, select Diagnostic
Startup.
D.    From the System Configuration tool, modify the Startup
applications.

Answer: D

QUESTION 100
You are in charge of two computers that are respectively
named Computer1 and Computer2. Computer1 runs Windows 7 and Computer2 runs
Windows XP Professional.
On Computer1, you enable Remote Desktop as shown in
the Remote Desktop exhibit. (Click the Exhibit button.)

wpsB9C5.tmp_thumb_thumb

Later you log on to Computer2 and try to connect to Computer1 by using Remote
Desktop. The connection fails and you receive the error message shown in the
Remote Desktop Disconnected exhibit. (Click the Exhibit button.)

wpsB9C5.tmp4_thumb_thumb

You need to ensure, that you can connect to Computer1 by using Remote
Desktop.
What action should you perform?

A.    On Computer1, enable the Allow connections from computers running any
version of Remote Desktop setting.
B.    On Computer2, assign the Client
(Respond Only) IPSec policy.
C.    On Computer1, add your user account to the
Remote Desktop Users group.
D.    On Computer2, create a firewall exception
for the Remote Desktop Protocol (RDP).

Answer: A

advertisement_thumb3_thumb

http://www.braindump2go.com/70-680.html

         

70-741 Dumps
[Sep-2019-New]Real 70-741 Dumps PDF 283Q-Braindump2go(New Questions)

Sep/2019 Braindump2go 70-741 Exam Dumps with PDF and VCE New Updated Today! Following are some new 70-741 Exam Questions!          

AZ-301 Exam Dumps
[Sep-2019]Real Exam Questions-Braindump2go AZ-301 Dumps PDF 200Q Download(New Questions)

Sep/2019 Braindump2go AZ-301 Exam Dumps with PDF and VCE New Updated Today! Following are some new AZ-301 Exam Questions:          

70-740 Dumps
[August-2019-New]Download 70-740 Dumps PDF from Braindump2go(New Questions)

August/2019 Braindump2go 70-740 Exam Dumps with PDF and VCE New Updated Today! Following are some 70-740 Real Exam Questions: