This page was exported from Free Download Latest Braindump2go Microsoft Exam Dumps [ http://www.imcsedumps.com ] Export date:Sun Aug 25 2:38:14 2019 / +0000 GMT ___________________________________________________ Title: Official 2014 Free Microsoft 70-410 Dumps Sharing(51-60)! --------------------------------------------------- QUESTION 51You have a server named Server1 that runs Windows Server 2012 R2. You connect three new hard disks to Server1.You need to create a storage space that contains the three disks. The solution must meet the following requirements: - Provide fault tolerance if a single disk fails. - Maximize the amount of files that can be stored in the storage space.What should you create? A.    A simple spaceB.    A spanned volumeC.    A mirrored spaceD.    A parity space Answer: DExplanation:A. Stripes data across a set of pool disks, and is not resilient to any disk failures. B. A spanned volume is a dynamic volume consisting of disk space on more than one physical disk and not fault tolerantC. Fault tolerant but Not max spaceD. Fault tolerant and better space ratioParity spaces are designed for capacity efficiency and increased resiliency. Parity spaces are best suited for archival data and streaming media, such as music and videos.http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked- questions-faq.aspxhttp://social.technet.microsoft.com/wiki/contents/articles/15198.storage-spaces-overview.aspx http://technet.microsoft.com/en-us/library/cc772180.aspx QUESTION 52You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1. You need to add a graphical user interface (GUI) to Server1.Which tool should you use? A.    The setup.exe commandB.    The dism.exe commandC.    The imagex.exe commandD.    The Add-WindowsPackage cmdlet Answer: BExplanation:The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM:Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:ServerGui-Shell /featurename:Server-Gui-Mgmt QUESTION 53You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters an connected to a network named LAN1. The two other network adapters are connected to a network named LAN2.You need to create a network adapter team from the three network adapters connected to LAN 1.Which tool should you use? A.    Routing and Remote AccessB.    Network and Sharing CenterC.    Server ManagerD.    Network Load Balancing Manager Answer: CExplanation: http://technet.microsoft.com/en-us/library/hh831648.aspx QUESTION 54You have a server named Server1 that runs Windows Server 2012 R2.You need to remove Windows Explorer, Windows Internet Explorer, and all related components and files from Server1. What should you run on Server1? A.    Uninstall-WindowsFeature Server-Gui-Mgmt-Infra RemoveB.    Uninstall-WindowsFeature Server-Gui-Shell RemoveC.    msiexec.exe /uninstall iexplore.exe /xD.    msiexec.exe /uninstall explorer.exe /x Answer: BExplanation:A. Would be a server core installB. No IE or taskbar, explorer or control panelC. Would leave componentsD. Would leave componentsIn Windows Server 2012 R2, you can remove the Server Graphical Shell, resulting in the "Minimal ServerInterface".This is similar to a Server with a GUI installation, but Internet Explorer 10, Windows Explorer, the desktop, andthe Start screen are not installed.Microsoft Management Console (MMC), Server Manager, and a subset of Control Panel are still present.If the server has a full installation of Windows Server, and I need to bring the server down to minimal serverinterface, I only need to remove the Server-GUI-Shell. http://technet.microsoft.com/en-us/library/hh831786(v=ws.11).aspx QUESTION 55You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1. VM1 has a legacy network adapter. You need to assign a specific amount of available network bandwidth to VM1. What should you do first? A.    Remove the legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.B.    Add a second legacy network adapter, and then run the Set-VMNetworkAdoptercmdletC.    Add a second legacy network adapter, and then configure network adapter teaming.D.    Remove the legacy network adapter, and then add a network adapter Answer: DExplanation:A. Set-VMNetworkAdaptercmdlet configures features of the virtual network adapter in a virtual machine or the management operating systemB. The legacy network adapter doesn't support bandwidth management C. The legacy network adapter doesn't support bandwidth management D. Add a New network adapter The legacy network adapter doesn't support bandwidth management http://technet.microsoft.com/en-us/library/hh848457(v=wps.620).aspx http://www.techrepublic.com/blog/networking/set-bandwidth-limits-for-hyper-v-vms- withwindows-server-2012/5924 QUESTION 56Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. On a server named Core1, you perform a Server Core Installation of Windows Server 2012 R2. You join Core1 to the adatum.com domain. You need to ensure that you can use Event Viewer on Server1 to view the event logs on Core1. What should you do on Core1? A.    Run the Enable-NetFirewallRulecmdlet.B.    Run sconfig.exeand configure remote managementC.    Run the Disable-NetFirewallRulecmdlet.D.    Run sconfiq.exeand configure the network settings. Answer: AExplanation:A. Allows MMC snap in for Event Viewer.B. Modifies service entriesC. Would Disable a firewall rule which was enabledD. Modifies service entriesEnable-NetFirewallRule -DisplayGroup "Remote Event Log Management" http://technet.microsoft.com/en-us/library/cc990290(v=ws.10).aspx http://technet.microsoft.com/en-us/library/jj574205.aspxhttp://mikefrobbins.com/2013/02/28/use-powershell-to-remotely-enable-firewall-exceptions-on-windows-server-2012/ QUESTION 57Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8.You need to ensure that when users are connected to the network, they always use local offline files that are cached from Server1.Which Group Policy setting should you configure? A.    Configure slow-link mode.B.    Configure Slow link speedC.    Enable file synchronization on costed networksD.    Turn on economical application of Administratively assigned Offline Files. Answer: AExplanation:A. Offline Files to provide faster access to cached files and redirected folders.B. Defines a slow connection for purposes of App1ying and updating Group Policy. C. automatically tracks roaming and bandwidth usage limits while on metered connections D. Lists network files and folders that are always available for offline use. This policy makes the specified filesand folders available offline to users of the computer. When Offline Files is operating in the slow-link mode, all network file requests are satisfied from the OfflineFiles cache. This is similar to a user working offline. If you enable this policy setting, Offline Files uses the slow-link mode if the network throughput between theclient and the server is below (slower than) the Throughput threshold parameter, or if the round-trip networklatency is above (slower than) the Latency threshold parameter. http://technet.microsoft.com/en-us/library/hh968298.aspxhttp://technet.microsoft.com/en-us/library/cc957631.aspxhttp://technet.microsoft.com/en-us/library/jj127408.aspxhttp://www.group-policy.com/ref/policy/2229/Configure_slow-link_mode QUESTION 58Your network contains an Active Directory domain named contoso.com. All servers run either Windows Server 2008 R2 or Windows Serve 2012 R2. All client computers run either Windows 7 or Windows 8. The domain contains a member server named Server1 that runs Windows Server 2012 R2. Server1 has the File and Storage Services server role installed. On Server1, you create a share named Share1.You need to ensure that users can use Previous Versions to restore the files in Share1.What should you configure on Server1? A.    The Shadow Copies settingsB.    A Windows Server Backup scheduleC.    A data recovery agentD.    The Recycle Bin properties Answer: AExplanation:A. Enable and schedule shadow copies for Share1B. The backup doesn't give users access until files are restored D. No settings for file versionhttp://technet.microsoft.com/en-us/library/cc786104(v=ws.10).aspx QUESTION 59You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Print and Document Services server role installed. Server1 is connected to two identical print devices.You need to ensure that users can submit print jobs to the print devices. The solution must ensure that if one print device fails, the print jobs will print automatically on the other print device.What should you do on Server1? A.    Add two printers and configure the priority of each printer.B.    Add one printer and configure printer pooling.C.    Install the Network Load Balancing (NLB) feature, and then add one printer.D.    Install the Failover Clustering feature, and then add one printer Answer: BExplanation:A. expedite documents that need to be printed immediately B. A printing pool is one logical printer connected to multiple printers through multiple ports of theprint server. The printer that is idle receives the next document sent to the logical printer. Whenprinting to a printer pool, the spooler will send waiting jobs to alternate ports. If the original or alternateports are not availableC. NLB for printing is not supportedD. Would need 2 nodesA printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. This is useful in a network with a high volume of printing because it decreases the time users wait for theirdocuments.A printing pool also simplifies administration because multiple printers can be managed from the same logicalprinter on a server. If one device within a pool stops printing, the current document is held at that device. The succeedingdocuments print to other devices in the pool, while the delayed document waits until the nonfunctioningprinter is fixed. Efficient printer pools have the following characteristics:All printers in the pool are the same model.Printer ports can be of the same type or mixed (parallel, serial, and network). It is recommended that all printers be in one location. Because it is impossible to predict which printer willreceive the document, keep all printers in a pool in a single location. Otherwise, users might have a hard timefinding their printed document. http://technet.microsoft.com/en-us/library/cc757086(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc784619(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc958172.aspxYou can create a printing pool to automatically distribute print jobs to the next available printer. A printing poolis one logical printer connected to multiple printers through multiple ports of the print server. The printer that isidle receives the next document sent to the logical printer. QUESTION 60You have a server named Server2 that runs Windows Server 2012 R2. You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.) The Everyone group has read share permission and read NTFS permission to Sources.You need to ensure that when users browse the network, the Sources share is not visible.What should you do? A.    From the properties of the Sources folder, remove the Sources share, and then share the Sources folder as Sources$B.    From the properties of the Sources folder, deny the List Folder Contents permission for the Everyone groupC.    From the properties of the Sources share, configure access-based enumerationD.    From the properties of the Sources folder, configure the hidden attribute Answer: AExplanation:A. need to remove the old share, $ creates a hidden share B. This would deny everyineC. This feature allows users of Windows Server 2003-Based file servers to list only the files and folders towhich they have access when browsing content on the file server D. This would hide the physical folder not the shareA hidden share is identified by a dollar sign ($) at the end of the share name Hidden shares are not listed when you look through the shares on a computer or use the "net view" command Why Use Hidden Shares? Using hidden shares on your network is useful if you do not want a shared folder or drive on the network to beeasily accessible. Hidden shares can add another layer of protection for shared files against unauthorizedpeople connecting to your network. Using hidden shares helps eliminate the chance for people to guess yourpassword (or be logged into an authorized Windows account) and then receive access to the shared resource. http://support.microsoft.com/kb/314984http://technet.microsoft.com/en-us/library/cc784710(v=ws.10).aspx   If you want to pass the Microsoft 70-410 Exam sucessfully, recommend to read latest Microsoft 70-410 Dump full version. --------------------------------------------------- Images: http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image001_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image0014_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image002_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image0016_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image0024_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image0026_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image0018_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image0028_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image00210_thumb.jpg http://examgod.com/l2pimages/Official2014FreeMicrosoft70410DumpsShari_CB31/clip_image00110_thumb.jpg --------------------------------------------------- --------------------------------------------------- Post date: 2014-05-06 06:37:31 Post date GMT: 2014-05-06 06:37:31 Post modified date: 2014-05-06 06:37:33 Post modified date GMT: 2014-05-06 06:37:33 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com