[2015 FREE UPDATION] Braindump2go Guarantee Microsoft 70-417 100% Success By Using Latest Microsoft 70-417 Practice Exam Questions (255-270)
Quick and Effective Microsoft 70-417 Exam Preparation Options – Braindump2go new released 70-417 Exam Dumps Questions! Microsoft Official 70-417 relevant practice tests are available for Instant downloading at Braindump2go! PDF and VCE Formates, easy to use and install! 100% Success Achievement Guaranteed!
Vendor: Microsoft
Exam Code: 70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012 R2 Exam
QUESTION 256
You have virtual machine named VM1.
VM1 uses a fixed size virtual hard disk (VHD) named diskl.vhd. Diskl.vhd is 200 GB.
You shut down VM1.
You need to reduce the size of diskl.vhd.
Which action should you select from the Edit Virtual Hard Disk Wizard?
A. Merge
B. Compact
C. Shrink
D. Convert
Answer: D
Explanation:
The Edit Virtual Hard Disk Wizard allows you to Compact, Convert, or Expand the VHD. Compacting reduces the size of a dynamically expanding VHD but not a fixed-size VHD. Converting changes the disk format to the newer VHDX.
This process recreates the virtual disk, and allows you to specify the size of the VHDX.
http://blogs.technet.com/b/yungchou/archive/2013/01/23/hyper-v-virtual-hard-disk-vhd-operations-explained.aspx
http://blogs.technet.com/b/aviraj/archive/2012/05/06/windows-server-2012-convert-vhd-to-vhdx-using-hyper-v-manager.aspx
QUESTION 257
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.
Your company uses smart cards for authentication.
You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.
What should you configure?
A. The NUMA Spanning settings
B. The RemoteFX settings
C. The Enhanced Session Mode Policy
D. The Integration Services settings
Answer: C
QUESTION 258
Your network contains an Active Directory domain named contoso.com.
You have a DHCP server named Server1 that runs Windows Server 2008.
You install Windows Server 2012 R2 on a server named Server2.
You install the DHCP Server server role on Server2.
You need to migrate the DHCP services from Server1 to Server2.
The solution must meet the following requirements:
– Ensure that existing leases are migrated.
– Prevent lease conflicts.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Server1, run the Export-DhcpServer cmdlet.
B. On Server1, run the Stop-Service cmdlet.
C. On Server2, run the Receive-SmigServerData cmdlet.
D. On Server2, run the Stop-Service cmdlet.
E. On Server2, run the Import-DhcpServer cmdlet.
F. On Server1, run the Send-SmigServerData cmdlet.
Answer: ABE
QUESTION 259
Your network contains an Active Directory domain named contoso.com.
The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2.
You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.
You need to ensure that Scope1 has a subnet mask of 255.255.255.0.
What should you do first?
A. From the DHCP console, reconcile Scope1.
B. From the DHCP console, delete Scope1.
C. From the DHCP console, modify the Scope Options of Scope1.
D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.
Answer: C
Explanation:
Set-DhcpServerv4Scope
Sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service.
QUESTION 260
Drag and Drop Question
Your network contains two Active Directory forests named contoso.com and adatum.com.
Each forest contains an Active Directory Rights Management Services (AD RMS) root cluster.
All servers run Windows Server 2012 R2.
You need to ensure that the rights account certificates issued in adatum.com are accepted by the AD RMS root cluster in contoso.com.
What should you do in each forest? To answer, drag the appropriate actions to the correct forests. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 261
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as a standalone certification authority (CA).
You install a second server named Server2.
You install the Online Responder role service on Server2.
You need to ensure that Server1 can issue an Online Certificate Status Protocol (OCSP) Response Signing certificate to Server2.
What should you run on Server1?
A. The certreq.exe command and specify the -policy parameter
B. The certutil.exe command and specify the -getkey parameter
C. The certutil.exe command and specify the -setreg parameter
D. The certreq.exe command and specify the -retrieve parameter
Answer: C
QUESTION 262
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2.
You are configuring a storage space on Server1.
You need to ensure that the storage space supports tiered storage.
Which settings should you configure?
To answer, select the appropriate options in the answer area.
Answer:
QUESTION 263
Hotspot Question
You have a server that runs Windows Server 2012 R2 and has the iSCSI Target Server role service installed.
You run the New-IscsiVirtualDisk cmdlet as shown in the New-IscsiVirtualDisk exhibit.
(Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibits.
Each correct selection is worth one point.
Answer:
QUESTION 264
Hotspot Question
Your network contains a DNS server named Server1 that runs Windows Server 2012 R2.
Server1 has a zone namedcontoso.com.
The network contains a server named Server2 that runs Windows Server 2008 R2.
Server1 and Server2 are members of an Active Directory domain named contoso.com.
You change the IP address of Server2.
Several hours later, some users report that they cannot connect to Server2.
On the affected users’ client computers, you flush the DNS client resolver cache, and the users successfully connect to Server2.
You need to reduce the amount of time that the client computers cache DNS records from contoso.com.
Which value should you modify in the Start of Authority (SOA) record? To answer, select the appropriate setting in the answer area.
Answer:
QUESTION 265
Your network contains two Active Directory forests named contoso.com and corp.contoso.com.
User1 is a member of the DnsAdmins domain local group in contoso.com.
User1 attempts to create a conditional forwarder to corp.contoso.com but receive an error message shown in the exhibit. (Click the Exhibit button.)
You need to configure bi-directional name resolution between the two forests.
What should you do first?
A. Add User1 to the DnsUpdateProxy group.
B. Configure the zone to be Active Directory-integrated.
C. Enable the Advanced view from DNS Manager.
D. Run the New Delegation Wizard.
Answer: B
QUESTION 266
Your network contains two Active Directory forests named contoso.com and adatum.com.
Each forest contains one domain. Contoso.com has a two-way forest trust to adatum.com.
Selective authentication is enabled on the forest trust.
Contoso contains 10 servers that have the File Server role service installed.
Users successfully access shared folders on the file servers by using permissions granted to the Authenticated Users group.
You migrate the file servers to adatum.com.
Contoso users report that after the migration, they are unable to access shared folders on the file servers.
You need to ensure that the Contoso users can access the shared folders on the file servers.
What should you do?
A. Disable selective authentication on the existing forest trust.
B. Disable SID filtering on the existing forest trust.
C. Run netdom and specify the /quarantine attribute.
D. Replace the existing forest trust with an external trust.
Answer: B
Explanation:
QUESTION 267
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table.
You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically.
What should you do on Server1?
A. Configure the Discovery settings of the iSCSI initiator.
B. Configure the security settings of the iSCSI target.
C. Run the Set-Wmilnstance cmdlet.
D. Run the Set-IscsiServerTarget cmdlet.
Answer: C
Explanation:
http://blogs.technet.com/b/filecab/archive/2012/06/08/iscsi-target-cmdlet-reference.aspx
11.Manage iSNS server registration
The iSNS server registration can be done using the following cmdlets, which manages the WMI objects.
To add an iSNS server:
Set-WmiInstance -Namespace root\wmi -Class WT_iSNSServer –Arguments
@{ServerName=”ISNSservername”}
QUESTION 268
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join.
You run nslookup enterprise registration and you receive the following results:
You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation.
How should you configure the certificate request?
To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 269
Drag and Drop Question
You have a server that runs Windows Server 2012 R2.
You create a new work folder named Share1.
You need to configure Share1 to meet the following requirements:
– Ensure that all synchronized copies of Share1 are encrypted.
– Ensure that clients synchronize to Share1 every 30 minutes.
– Ensure that Share1 inherits the NTFS permissions of the parent folder.
Which cmdlet should you use to achieve each requirement? To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 270
You have a virtual machine named VM1 that runs on a host named Host1.
You configure VM1 to replicate to another host named Host2. Host2 is located in the same physical location as Host1.
You need to add an additional replica of VM1. The replica will be located in a different physical site.
What should you do?
A. From VM1 on Host2, click Extend Replication.
B. On Host1, configure the Hyper-V settings.
C. From VM1 on Host1, click Extend Replication.
D. On Host2, configure the Hyper-V settings.
Answer: A
Explanation:
http://blogs.technet.com/b/virtualization/archive/2013/12/10/hyper-v-replica-extend-replication.aspx
Once that is done, go to replica site and from Hyper-V UI manager select the VM for which you want to extend the replication. Right click on VM and select “Replication->Extend Replication”. This will open Extend Replication Wizard which is similar to Enable Replication Wizard.
http://technet.microsoft.com/en-us/library/dn551365.aspx
http://technet.microsoft.com/en-us/library/jj134240.aspx
NOTE: You configure a server to receive replication with Hyper-V Manager, in this situation the replica site is assumed to be the Replica Server.
Therefore you extend replication from VM1 on Host2.
100% 70-417 Complete Success & Money Back Guarantee!
By utilizing Braindump2go high quality Microsoft 70-417 pExam Dumps Products, You can surely pass 70-417 certification 100%! Braindump2go also offers 100% money back guarantee to individuals in case they fail to pass Microsoft70-417 in one attempt.